UNIVERSAL FLOAT GUAGE FOR FUEL / OIL / WATER TANKS. UP TO 2.5 Metres (8 feet approx) These float gauges are for oil or water storage tanks. The gauges give readings from 0 to 250 centimetres in 10 centimetre increments. Can be used on any tank up to a maximum depth of 2.5 Metres (8 Feet approx) The gauges are mechanical so there is very little to go wrong and no batteries are required. This gauge is suitable for any storage tanks with a 1 1/2 inch BSP female thread. If there is no suitable thread insert on your tank, you can still fit as follows; Drill a 1.1/2" diameter hole in the top of the tank (make sure that it is near to an access point where you can get your hand inside). Insert the male thread of the gauge and secure with the 1.1/2" back-nut which is provided. Adjusting the gauge to suit your tank is simple. Firstly measure the depth of your tank. Then remove the cover from the gauge using a small flat head screwdriver or a small coin. Once removed the callibrated disc inside will come loose. It is double sided....If your tank is 150 cms deep or less use the side showing "0 to 150". If your tank is deeper than 150 cms, use the side showing "0 to 250". On the gauge body you will see a red MAX line, align this with the callibrated disc so that it pointing to your tank depth. Push the cover back on and you're ready to go.

UNIVERSAL FLOAT GUAGE FOR FUEL / OIL / WATER TANKS UP TO 25 Metres 8 feet approx B01MAYBESM

UNIVERSAL FLOAT GUAGE FOR FUEL / OIL / WATER TANKS UP TO 25 Metres 8 feet approx B01MAYBESM

  • Product Code: B01MAYBESM
  • Availability: In Stock
  • £172.18
  • £43.75