This is a 3/4" Tank Adapter with a FULLY ADJUSTABLE Snap-On garden hose connector at the other end. It can be used with any tank or drum to provide a fully adjustable snap-on connection for a standard 1/2" (13 mm) garden hose pipe. The snap-on fitting can be set to any angle and rotates through 360 degrees. FITTING Firstly, you will need to drill a hole (25 / 27 mm diameter) where you want to locate the item. Important.....You must be able to get your hand into the tank or drum somewhere close to enable tightening of the back nut. You will also need to make sure that the area where the hole is being drilled is reasonably flat. You will not get a good watertight seal on a heavily curved surface (a slight contour will be OK). Once you have drilled the hole, remove the back nut and rubber sealing washer from the adapter and push the threaded section through the hole. Then push the rubber sealing washer back over the threaded section and finish by screwing home the back nut as tight as you can by hand. Do not overtighten.

3/4BSP Tank Adapter to FULLY ADJUSTABLE Snap On garden hose connector B01D1RLSMW

3/4BSP Tank Adapter to FULLY ADJUSTABLE Snap On garden hose connector B01D1RLSMW

  • Product Code: B01D1RLSMW
  • Availability: In Stock
  • £199.08
  • £19.64